Commercial Roofing Systems - On-Line Catalog Koppers Professional Roofing Contractors Program Product Guide Product Information Request Built-Up Roofing Systems Coal Tar BUR System Descriptions Materials and System Features Safety Uses Asphalt BUR Systems Description General Roof Specification Information Coal Tar IRMA Fabrics Roof Maintenance Product Compliance and Approvals Underwriters Laboratories Classification For Koppers Coal Tar Built-Up Roof Systems Factory Mutual Acceptance of Koppers Coal Tar Built-Up Roof Coverings Building Codes General Requirements and Considerations for the Designer Roof Structure System Decks Attachment Suggestions for the Designer Expansion Joints Slopes Deck Requirements and Roof Specifications Guide Vapor Retarders Insulation Wood Nailing Strips Aggregate Surfacing Benefits of Aggregate Surfacing Base Sheet Cold Storage and Freezer Buildings Water-Cooled, Water Retaining and Retarded Drainage Roof Systems Glaze Coating Temporary Roofing Tie-in Requirements Reroofing and Recovering Design Considerations Application Considerations and Specifications General Application Procedure In-place Weights per 100 sq.ft. Actual Coal Tar Amounts Used Temperatures Application of Felt Material Protection Bitumen Control Application of Top Pour and Aggregate Surface Surfacing Time Water Stops Insulation Base Sheet Wood Nailers Cold Weather Application Koppers Coal Tar Built-Up Roofing Systems for Dead Level and Low Slope Roof Designs Tarred Organic Membrane - Aggregate Surface Specifications Tar-Glas Membrane - Aggregate Surface Specifications Water Cooled Roofs, Water Retaining Roofs and Restricted Drainage Systems Discussion Considerations for the Designer Flashing Specification and Details General General Guidelines Specification No. 172 Specification No. 174 Specification No. 176 Specification No. 180 Specification No. 182 General Information for Typical Details B.1 Raised Heavy Metal Roof Edge B.2 Scupper Through Roof Edge B.3 Raised Light Metal Roof Edge B.4 Light Metal Roof Edge B.5 Base Flashing for Non-Wall Supported Deck B.6 Base Flashing for Wall Supported Deck B.7 Expansion Joint B.8 Area Divider (Control Joint) B.9 Curb Detail for Rooftop Units B.10 Roof Drain B.11 Counterflashing for Concrete Walls or Parapet B.12 Traffic Pad B.13 Insulated Deck Steel Frame B.14 Stack Flashing B.15 Pitch Pocket Roof Insulation Koppers KOP-R Roof Insulation - Isocyanurate Perlite Roof Insulation Regular and High Density Fiberboard Insulation Roof Maintenance Effective Maintenance with Tar and Asphalt Roof Resaturants Aluminum Roof Coatings Reinforcement Fabrics Glasfab® and Glascoat® Woven Glass Fabrics Koppers Jute (Burlap) Fabric Koppers Glass Mats Applications of Koppers Reinforcement Fabrics Roof Repairs Roof Resurfacing Plaza Deck Waterproofing Foundation Waterproofing And Damp-proofing Specifications and Technical Data Koppers System 2000 Modified Bitumen Membranes Application Flashing Safety Measures Typical Physical Properties Deck Requirements and Roof Specifications Guide Kop-Klad Roof Edge Systems Roof Warranty Program Requirements Warranties Roofing Specifications and Procedures Built-Up Roofing Warranty Type & Term Chart