Flashings are the terminal closures of a roofing system, which
perform a waterproofing, and, in some systems, a decorative
function. Flashings must be installed at all intersections
formed by vertical surfaces. Water entering the roofing system
through flashings will destroy the effectiveness of the roofing.
Koppers flashings are an integral part of a Koppers roof. Designed
for flexibility so that slight movements do not dislodge them
and fastened securely to the wall, they give many years of service.
|
 |
|
Cold Polyester
|
Color Coded Blue. Stabilized tricot, warp
knit.
|
|
|
Hot Polyester
|
Color Coded Gray. Spun-bonded, non-woven polyester.
|
|
|
Polyester Base Flashing
|
Asphalt Coated, polyester fabric reinforced, base flashing.
|
|
|
Mod. Bit Base Flashing (2045-M, 2041-M)
|
Polyester reinforced SBS Modified Bitumen base flashing.
|
|
Prior to installing any roofing system, it is necessary to review
routine procedures and precautions applicable to their installation
as well as the Material Safety Data Sheets for the involved products.
Koppers offers helpful information in a pamphlet entitled “Guidelines:
Health, Safety and Environment for Coal Tar Built-Up Roofing.” For
a copy of this publication please contact Koppers Sales Center
at 1-800-558-2706. Copies of Material Safety Data Sheets are
available.
This product offers a variety of available details for use in the
specification of Koppers roofs. For more information visit our online
roofing catalog.
For more information about this product or for assistance specifying
Koppers materials for your roofing installation contact our sales
department at 1-800-558-2706 (fax us at 412-227-2262)
To reach our Warranty and Technical Department,
call 1-800-468-9629 or Fax us at 412-227-2002.
|
